Download the Latest Cisco Packet Tracer For PC/Laptop

Download the Latest Cisco Packet Tracer For PC

This article describes how to download the latest version of Cisco Packet Tracer for Windows 11/10 PC/laptop, its features, and how to use this software.

If you are learning about networks or you want to know more about networks, creating networks, and how various devices are connected in any network, you can find many simulation applications on the internet.

Such simulation applications allow you to create virtual networks to learn the functions of various computer networks. You can also see how other devices in the network behave and how different network packets are being transmitted between them.

While there are various such options available, one of the best options is Cisco Packet Tracer as it works flawlessly and offers users various features.

What is Cisco Packet Tracer?

Download the Latest Cisco Packet Tracer For PC-1

Before you install Cisco Packet Tracer on your computer, take a look at the features and options it provides. Not only will you be able to use Packet Tracer to its full potential, but you can also rest assured that it has all the features and options that you need for your needs.

As I said before, the main task of Cisco Packet Tracer is to create a virtual computer network in this application. You can easily check certain network functions and how data packets are transmitted on the virtual computer network once it is created.

Such virtual computer networks can be perfect for understanding complex networking concepts and computer networking basics. Cisco Packet Tracer supports the following protocols:

Application

FTP, SMTP, POP3, HTTP, TFTP, Telnet, SSH, DNS, DHCP, NTP, SNMP, AAA, ISR VOIP, SCCP config and calls ISR to command support, Call Manager Express.

Transport

TCP and UDP, TCP Nagle Algorithm & IP Fragmentation, RTP.

Network

BGP, IPv4, ICMP, ARP, IPv6, ICMPv6, IPSec, RIPv1/ v2/ng, Multi-Area OSPF, EIGRP, Static Routing, Route Redistribution, Multilayer Switching, L3 QoS, NAT, CBAL, Zone-based policy firewall and Intrusion Protection System on the ISR, GRE VPN, IPSec VPN.

Network Access Interface

Ethernet (802.3), 802.11, HDLC, Frame Relay, PPP, PPPoE, STP, RSTP, VTP, DTP, CDP, 802.1q, PAgP, L2 QoS, SLARP, Simple WEP, WPA, EAP.

How to Download the Latest Version of Cisco Packet Tracer

After learning more about Cisco Packet Tracer and the various features it offers to users, and downloading and installing it on your computer, you have to download its installer file first to install it.

You can click the download link for the latest version of Cisco Packet Tracer for Windows 10/11 PC/laptops below.

Download: Cisco Packet Tracer 64-BIT | 32-BIT

How to Install Cisco Packet Tracer on Windows 10/11

Once you download the latest version of the installer file, you can go ahead and install it on your computer. Like any other application that you might use on your computer, you have to open its installer and follow the on-screen instructions to install it successfully.

1. Open the Download folder or the location where you saved the Cisco Packet Tracer installer file that was downloaded earlier.

2. Click the Cisco Packet Tracer installer file. After that, you have to agree to all the terms and conditions.

3. Select the installation location you want, and click the next or OK button to start the installation process.

4. Once Cisco Packet Tracer is installed on your computer, you can click Finish and open it.

5. You must first login with your Cisco account before using Cisco Packet Tracer to create and test a virtual computer network.

That’s how to download the latest version of Cisco Packet Tracer for PC/laptops. I hope this article helped you! Thank you for visiting and don’t forget if you find this article useful, please share it with your friends too.

Leave a Reply

Your email address will not be published.