How to Reset Epson L130 L220 L310 L360 and L365 Printers Automatically and Manually

How to Reset Epson L130 L220 L310 L360 and L365 Printers

The most effective technique for fixing a problematic printer is to reset it. Resetting the printer will return all settings to their original state, allowing the printing activity that caused the problem to resume normally.

Ink Pad Is At the End Of Its Service Live or Ink waste Is Full are two notifications that will appear on the computer screen when the Epson printer error. The presence of these two error notifications implies that there is a problem with your ink reservoir. When the ink reservoir is checked or deemed full, it can be determined that the printer system has misread the reservoir.

Also read: How to Solve Printer Printing Half a Page

In addition to error notifications that appear on your computer screen, printer errors are also marked with an ink/paper indication light that will flash alternately/simultaneously. this generally occurs on Epson L365, L360, L310, L220, L130, or other series printers.

The ink in the cartridge has run out, the cartridge is dirty/not tight/broken, paper jam (there is paper/dirt on the roller), or the paper printout has reached the maximum limit (overprint) are some of the causes of the blinking indicator light.

This guide contains steps on how to reset the Epson L130 L220 L310 L360 and L365 printers, both automatically and manually. But first, let’s find out what causes the Eposn printer to have an error or problem.

Check the Cause of Errors on Epson Printers

If your Epson printer is having problems, the first thing you should do is to check the causes that are causing the printer to not print or get stuck:

  • Check the ink level in the printer cartridge; if low, add or refill.
  • Make sure the printer cartridges are in good condition. Make sure that there is no dirt stuck to or obstructing it and check its position to make sure it is attached properly.
  • Make sure the printer rollers are not clogged with paper.
  • Check that the cable connecting the printer to the computer is properly connected.

If you have checked it and it is in good condition, but the printer is still not working, you have to do a Total Reset. Its purpose is to delete all data stored by the printer’s IC Counter (EEPROM).

Here are two ways to reset the Epson L130 L220 L310 L360 and L365 Printers, the first is a manual reset and the second is an automatic reset using the printer resetter software.

How to Reset Epson L130 L220 L310 L360 and L365 Printers Manually

1. For about 3-5 minutes, unplug the power cord.

2. Restart the printer and wait for it to turn on properly.

3. Then, for 5 seconds, press and hold the resume button (ink logo), then release.

4. Repeat pressing and holding the resume button for 3 seconds, then release.

5. The printer will then automatically reset itself and wait for the process to complete.

If all went well, the indication light will stop flashing and the printer is ready to be used again.

How to Reset Epson L130 L220 L310 L360 and L365 Printers Automatically

If the manual reset above doesn’t work, try doing an automatic reset using the Resetter Epson Adjustment Program software for the L Series L130/L220/L310/L360/L365.

1. First, first download the Resetter Epson Adjustment Program (Adjprog.exe) software for the Epson L130/L220/L310/L360/L365 printer from here (password: safepedia.com), then extract the file.

2. Next, please run the resetter application by clicking 2X on the icon / file “Epson adjustment“.

3. Click the button “Select“Select printer type on”Model Name” and the USB Port in use, but it is recommended that you choose “Auto Selection” course. After that click “OK“.

How to Reset Printer Epson L130 L220 L310 L360 and L365-1

4. Next, click “Particular Adjustment Mode“then select”Waste ink pad counter” then “OK“.

5. In the next menu, Tick on “Play pad counter“, then click “CheckAt this stage, the printer will provide some important information about the printer, including the number of times it has printed.

6. After that, check again on “Play pad counter” and continue by clicking “InitializationWait until the process is complete.

7. After the reset process is complete, a notification will appear on the computer screen “Please Turn On and Turn Off your printerNow, at this stage, please turn off and then turn on your printer again.

8. Done.

This is a tutorial on how to do a manual and automatic reset using the Adjprog Printer Epson L130, L220, L310, L360 and L365 resetter. hopefully useful for those of you who need it.

Leave a Reply

Your email address will not be published.